USD
EUR
GBP
CAD
AUD
CHF
HKD
JPY
RUB
BRL
CLP
NOK
DKK
SEK
KRW
ILS
MXN
CNY
SAR
SGD
NZD
ARS
INR
COP
AED
Home
Products
Ingersoll Rand Air Compressor
Oil-Flooded Rotary Screw Air Compressor RM series oil screw air compressor Oil-Free Screw Air Compressor Centrifugal air compressor Oil-free scroll air compressor Ingersoll Rand Air Compressor Parts Dryer Gas Tank
Gardner Denver
GDK series screw air compressor Scroll Air Compressor
RUNNINGWAY Air Compressor
Oil Free Screw Air Compressor Water lubricated air compressor Oil-free scroll air compressor Oil-free piston air compressor Dryer Filter
Nitrogen Making Solution
Oxygen Making Solution
Atlas Copco
High Pressure Screw Compressed Air System
Air Suspension Solution
Medium And High Pressure Air System Solution
News
Inquiry
Help
Blog
Home
Products
Ingersoll Rand Air Compressor
Oil-Flooded Rotary Screw Air Compressor RM series oil screw air compressor Oil-Free Screw Air Compressor Centrifugal air compressor Oil-free scroll air compressor Ingersoll Rand Air Compressor Parts Dryer Gas Tank
Gardner Denver
GDK series screw air compressor Scroll Air Compressor
RUNNINGWAY Air Compressor
Oil Free Screw Air Compressor Water lubricated air compressor Oil-free scroll air compressor Oil-free piston air compressor Dryer Filter
Nitrogen Making Solution
Oxygen Making Solution
Ingersoll Rand Air CompressorIngersoll Rand Air Compressor
Gardner DenverGardner Denver
RUNNINGWAY Air CompressorRUNNINGWAY Air Compressor
News
Inquiry
Help
Blog
icon
Home > Industry News

Air compressor failure: comprehensive failure analysis

Views : 3389
Author : RUNNINGWAY
Update time : 2020-04-24 09:09:35
Air compressors often fail. If the following failures occur, don't worry, first try to use the experience of Yiju service personnel to step by step:

The compressor does not supply air:

1) Check whether the control cylinder is in motion, check the butterfly valve for mechanical failure;

2) Check whether the loaded electromagnetic coil has suction power;

3) Check the sub-circuit where the solenoid valve is located one by one.

The compressor cannot start:

1) Check whether there is control voltage, if not, check whether the fuse, etc. are intact;

2) Check whether the control relay and time relay are operating normally.

The compressor runs normally, and it is difficult to start after shutdown:

1) The grade of lubricating oil used is incorrect, and the oil should be changed thoroughly after cleaning;

2) The oil is sticky and coking and should be changed thoroughly after cleaning;

3) The shaft seal is seriously leaking, remove and replace;

4) The original position of the unloading flap changes, and readjust the position.

The compressor does not start smoothly, and it automatically stops after a few seconds of startup:

1) Check whether the automatic air switch jumps and the voltage is normal, should be excluded;

2) Check whether the intake butterfly valve is closed properly, and it should be checked and readjusted or replaced;

3) Check whether the contactor and motor three-phase are normal during Y- △ start.
Previous :
Next :
Related News
Common Faults of Ingersoll Rand Oil-Injected Rotary Screw Air Compressors (Causes, Checks & Fixes)
Sep .04.2026
Why Does Your Ingersoll Rand Air Compressor Keep Starting and Stopping? Causes and Fixes
Sep .04.2026
Screw Air Compressor Low Oil Pressure: 11 Causes, Troubleshooting & Fixes
Sep .04.2026
MSG Centac High Pressure Centrifugal Air Compressor Reliable Oil-Free Performance
Oct .31.2025
The MSG Centac High Pressure Centrifugal Air Compressor from Ingersoll Rand is engineered to deliver reliable, 100% oil-free air for the most demanding high-pressure industrial applications. As part of the proven Centac product line, this compressor provi
Pitt
Pitt
Pitt